How to use
1.
Allow the test kit to stand at room temperature.
2.
Wash or sanitize your hands to keep them clean.
*Please dry your hands thoroughly before starting the test.
3.
Press down on the top of the clear ring and turn the cap counterclockwise to loosen it. Hold the end with the cotton swab facing up, making sure not to touch the tip of the cotton swab with your hand.
4.
A sterile cotton swab is used to collect vaginal secretions, preferably from the posterior vaginal fornix.
5.
Immediately return the sample to the container and tighten the cap clockwise.
6.
Hold the blue part of the testing device containing the test solution up and fold the blue protrusion. Press the transparent top part to squeeze out the test solution. The test solution will flow down the tube (into the cotton swab part), so dip the tip of the cotton swab into it.
7.
Hold the center of the test device and shake the tube to dissolve the sample in the test solution.
8.
Once the swab is fully immersed in the test solution, turn it upside down and hold it there for 30 seconds so that the test area can absorb the liquid.
9.
Place the test device on a level surface and wait 15 minutes before reading the results (do not use test results after 20 minutes).
Determining test results
negative
When a line appears only on the control line (C line) and no line appears on the test line (T line).
The specimen does not contain Candida, Trichomonas vaginalis, or Gardnerella antigens, or the concentrations are below the minimum detection limit.
*If you have any doubts about the results, please retake the test in 1-2 days.
positive
When a line appears on the control line (C line) and also on the test line (T line).
invalid
If no line appears on the control line (C line), the test is invalid regardless of whether or not there is a test line (T line).